MIRROR DEFOGGERS

MIRROR DEFOGGERS

We all know the problem, it's an everyday issue, step out from the shower or bath, and you find your bathroom mirror is steamed up and usually you have to wipe away the condensation with a towel or your hand. Well there is a solution! mirror defoggers provide just a nice bit of comfort for both your family and guests.

NO MORE STEAMY MIRROR

Mirror defoggers are adhesive heating pads, when installed onto the back of mirror. They provide heat energy, which transfers directly to the mirror, resulting in a warming of mirror surface. This gets rid of the mist. So every time you step out from the shower or bath, you no longer have to wait for the mist to clear before shaving, drying your hair or putting make up on.

TECHNICAL PARAMETERS
A: Voltage : 220V
B: Input power: 2.0-2.5w/dm
E: Double insulated layers
F: Self-adhesive backing
C: Average Temperature Rise: 15-18 ℃
D: Thickness: 0.4mm

FEATURES

Safe to use, (CE, UL approval)
Easy to install,
Low cost
Temperature is self-regulating

Other advantages over normal mirror:

Prevents moisture damage to silver coatings
Retains mirror in the place in the event of breakage
Reduces need for cleaning

Installation is not difficult and conforms to standard industry practice. As with any electrical product, we do recommend installation be performed by a qualified person in accordance with local codes.

The heating element of mirror defogger should never be cut or damaged. This will render the product useless. It cannot be repaired. Please take particular care over this point.
However you may trim the product so long as the actual heating element is NOT damaged, which is common for the oval and round series. Round and oval Defoggers should have excess adhesive backing material trimmed, but not closer than 20 mm from the electrical heating grid component.
Adhere the heater pad to the back of the mirror, NOT to the wall.
Always handle mirrors with care. Lay the mirror face down on a protective cushion/surface.
The back of the mirror must be absolutely clean, dry and grease free.
Peel off the protection paper first in about 10cm width and fold the paper, adhere the heater with self-backing directly onto the back of the mirror, using towel or some other soft rubber to wipe the back of the defogger. In the mean time, rip off the protection paper to stick the defogger onto the mirror easily.
Ensure that there are no trapped air bubbles and that the heater is positioned where you would like.
The wall can be wood, ceramic tile, marble and so on, which must be dry, stable, even otherwise, the heated mirror will be uneven.
Please allow a 2mm gap between the mirror and hard substances (eg ceramic brick, marble, tiles as well as metal and wood periphery around mirrors) If you have metal periphery, please ensure the mirror is earthed in line with regulations.
The heater should be switched. It can be wired to a simple switch, light fixture or fan. We always recommend our heaters are switched with bathroom lights so that it comes on and off with the lights.

POWER ENERGY

RECTANGULAR RATING CONSUMP

WATT KW.H

220V 220V

SIZE

400mm×600mm 46 0.046

450mm x 650mm 57 0.057

600mm×800mm 96 0.096

600mm×900mm 108 0.108

750mm×1000mm 150 0.15

850mm×1200mm 204 0.204

1000mm×1300mm 260 0.26

1200mm×1500mm 360 0.36